Siemens SINUMERIK 840D CNC 錯誤代碼

Assertion error in %1 line %2

Missing option bit for %1: %2 <hex>

[Channel %1: ] Incompatible OEM transformation version NCK %2 CC %3

Problem with externally linked COA application %1 Index: %2 Additional information: %3

Assertion error in %1 line %2

Block %1 invalid protection level for command %2 (protection level act.: %3 prog.: %4)

[Channel %1: ] Option 'Interrupt routines' not set

Option 'activation of more than %1 axes' not set

Option 'activation of more than %1 channels' not set

Option 'activation of more than %1 mode groups' not set

Option 'activation of more than %1KB SRAM' not set

Option 'Activation of more than %1 KB PLC user memory' not set

Option 'Activation of more than %1 magazines' not set

[Channel %1: ] Block %2 option 'interpolation of more than %3 axes' not set

[Channel %1: ] Block %2 axis %3: Axis has no IPO functionality

Option 'activation of more than %1 link axes' not set

Option 'activation of axis containers' not set

Option: it is not allo wed to set different IPO cycles or position control cycles with NCU link.

'Activate APC/Number of curren t setpoint filters' option not set.

Option 'activation of more than %1 lead link axes' not set

Machine data %1 reset, corresponding option is not set

Axis %1: MD %2 reset, corresponding option not sufficient

Option for IPO cycle time %1 ms not set

Option 'SPL inputs/outputs' not set.

Option 'Handwheel on PROFIBUS' not set

%1 option(s) is/are activated without setting the license key

%1 option(s) is/are activated that are not licensed by the license key

A wrong license key was entered three times, Power On required before next try.

'Selection of non-grinding-specific tools' option not possible

Invalid combination of options (%1)

[Channel %1: ] Block %2: function not possible

Option for collision avoidance is inadequate

[Channel %1: ] Block %2 following axis/spindle %3 generic coupling %4 required

Handwheel %1 failed

PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1

PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1

[Channel %1: ] NC start without reference point (action=%2<ALNX>)

[Channel %1: ] Error when selecting or deselecting the digitize function

[Channel %1: ] Continue program with NC start

[Channel %1: ] Internal NC stop after block search

[Channel %1: ] Inter-channel communication not possible

[Channel %1: ] Command %2 is already occupied

[Channel %1: ] command denied

[Channel %1: ] Communication overload for block preparation

[Channel %1: ] Auto-Repos function is not enabled

[Channel %1: ] Block %2 auxiliary function during thread cutting active

[Channel %1: ] Block %2 zero veloci ty at block end point during thread cutting

[Channel %1: ] Block %2 velocity limitation during thread cutting

[Channel %1: ] Block %2 thread pitch increase too high

[Channel %1: ] Block %2 thread pitch decrease too high

[Channel %1: ] Block %2 thread with frame not executable

[Channel %1: ] Axis %2 not stopped

[Channel %1: ] Block %3 axis %2 at software limit switch %4

[Channel %1: ] Axis %2 rests on software limit switch %3%4

[Channel %1: ] Block %2 axis %3 at working area limit %4

[Channel %1: ] Axis %2 rest s at working area limit %3%4

[Channel %1: ] Block %2 axis %3 reaches the coordinate system-specific working area limit %4

[Channel %1: ] Axis %2 is at coordinate system-specific working area limit %3%4

[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: The tool is not oriented parallel to the axis.

[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: no milling or drilling tool.

[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Transformation is active.

[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Tool not active.

[Channel %1: ] Axis %2 incorrect gantry machine data, error code %3

[Channel %1: ] Gantry configuration error. Error code %2

[Channel %1: ] Axis %2 gantry warning threshold exceeded

[Channel %1: ] Axis %2 gantry error threshold exceeded

[Channel %1: ] Waiting for synchronization start of gantry group %2

[Channel %1: ] Synchronization of gantry group %2 in progress

[Channel %1: ] Axis %2 gantry slave axis dynamically overloaded

[Channel %1: ] Axis %2 power OFF in the gantry error limit exceeded status

[Channel %1: ] Axis %2 impermissible axis status %3.

[Channel %1: ] Block %2 NCK protection zone %3 violated during automatic or MDI mode

[Channel %1: ] Block %2 channel-specific protection zone %3 violated during automatic or MDI mode

[Channel %1: ] NCK protection zone %2 violated during manual mode

[Channel %1: ] Channel-specific protection zone %2 violated during manual mode

[Channel %1: ] Block %2 protection zone monitoring is not guaranteed

[Channel %1: ] NCK protection zone %2 reached with axis %3 during manual mode

[Channel %1: ] Channel-specific protection zone %2 reached with axis %3 during manual mode

[Channel %1: ] Block %2 conflict with centerless grinding

[Channel %1: ] Block %3 axis %2 software limit switch %4

[Channel %1: ] Block %3 axis %2 software limit switch %4

[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN> violated

[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN>

[Channel %1: ] Block %3 axis %2 working area limitation %4

[Channel %1: ] Block %3 axis %2 working area limitation %4

[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>

[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>

[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>

[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>

[Channel %1: ] Block %2 too many empty blocks in WAB programming

[Channel %1: ] Block %2 directi on reversal with WAB infeed motion

[Channel %1: ] Block %2 WAB distance invalid or not programmed

[Channel %1: ] Block %2 WAB programmed several times

[Channel %1: ] Block %2 no valid WAB direction defined

[Channel %1: ] Block %2 WAB end position not clear

[Channel %1: ] Block %2 block search stop for WAB

[Channel %1: ] Block %2 retraction direction not defined for WAB

[Channel %1: ] Block %2 illegal retract plane with WAB

[Channel %1: ] Block %2 tool radius compensation activated without tool number

[Channel %1: ] Block %2 danger of collision due to tool radius compensation

[Channel %1: ] Block %2 overflow of local block buffer with tool radius compensation

[Channel %1: ] Block %2 selection of the tool radius compensation only possible in linear block

[Channel %1: ] Block %2 deselection of the tool radius compensation only possible in linear block

[Channel %1: ] Block %2 selection of the tool radius compensation via KONT not possible at the current starting point

[Channel %1: ] Block %2 deselection of the tool radius compensation via KONT not possible at the programmed end point

[Channel %1: ] Block %2 changing the compensation plane while tool radius compensation is active not possible

[Channel %1: ] Block %2 curvature radius with variable compensation value too small

[Channel %1: ] Block %2 path is parallel to tool orientation

[Channel %1: ] Block %2 helical axis is not parallel to tool orientation

[Channel %1: ] Block %2 tool radius compensation for ellipse with more than one revolution not possible

[Channel %1: ] Block %2 too many empty blocks between two traversing blocks with active tool radius compensation

[Channel %1: ] Block %2 path component of the block in the compensation plane becomes zero

[Channel %1: ] Block %2 discontinuous path with active tool radius compensation

[Channel %1: ] Block %2 3D tool radius compensation not possible

[Channel %1: ] Illegal change of surface orientation between block %2 and block %3

[Channel %1: ] Block %2 processing with tilt angle unequal 0 not possible

[Channel %1: ] Block %2 illegal tool orientation with 3D tool radius compensation

[Channel %1: ] Block %2 Illegal surface normal vector with 3D tool radius compensation

[Channel %1: ] Block %2 change of corner type due to change of orientation with active tool radius compensation

[Channel %1: ] Block %2 overflow of local block buffer due to orientation smoothing

[Channel %1: ] Block %2 illegal orientation change when activating or deactivating 3D face cutting

[Channel %1: ] Illegal tool orientation in block %2 at inside corner with block %3

[Channel %1: ] Illegal tool dimensions with face cutting in block %2

[Channel %1: ] Illegal tool change with face cutting in block %2

[Channel %1: ] Block%2 axis %3 must be geometry axis if tool radius compensation is active

[Channel %1: ] Block %2 tool radius compensation: too many blocks with suppression of compensation

[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation

[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation

[Channel %1: ] Block %2 impermissible change of a turning or grinding tool with active tool radius compensation

[Channel %1: ] Block %2 illegal orientation of involute with tool radius compensation

[Channel %1: ] Block %2 illegal curve type with tool radius compensation

[Channel %1: ] Block %2 tool radius compensation type requires orientation transformation

[Channel %1: ] Block %2 illegal tool for tool radius compensation with constraint surface

[Channel %1: ] Block %2 plane change during linear programming with angles

[Channel %1: ] Block %2 invalid angle during linear programming

[Channel %1: ] Block %2 illegal interpolation type during linear programming with angles

[Channel %1: ] Block %2 second block missing during linear programming with angles

[Channel %1: ] Block %2 angle specification missing in 2nd block during linear interpolation with angles

[Channel %1: ] Block %2 end point specification during angle programming contradictory

[Channel %1: ] Block %3 axis %2 is not a geometry axis

[Channel %1: ] Block %2 repositioning after switch of geometry axes or transformation

[Channel %1: ] Block %2 master spindle not defined

[Channel %1: ] Rotary axis/spindle %2 not defined

[Channel %1: ] Block %2 feedrate not programmed

[Channel %1: ] Block %3 velocity of positioning axis %2 is zero

[Channel %1: ] Block %2 master spindle also used as path axis

[Channel %1 ] Block %2 FZ active, but no tool offset, tool %3

[Channel %1: ] Block %2 FZ is active, but the number of teeth of the active D number %4 of tool %3 is zero.

[Channel %1: ] Block %2 facing axis for constant velocity not defined

[Channel %1: ] Block %2 too many empty blocks between two traversing blocks when inserting chamfers or radii

[Channel %1: ] Block %2 overflow of local block buffer in the case of chamfers or radii

[Channel %1: ] Block %2 activation of chamfers or radii (non-modal) without traversing movement in the block

[Channel %1: ] Block %2 chamfer or fillet has to be reduced

[Channel %1: ] Block %2 overflow of local block buffer when calculating splines

[Channel %1: ] Block %2 multiplicity of node is greater than its order

[Channel %1: ] Block %2 no S value programmed for constant cutting speed

[Channel %1: ] Block %2 irregular velocity waveform of one path axis

[Channel %1: ] Block %2 transfo rmation prohibits to traverse the pole

[Channel %1: ] Block %2 preprocessing and main run might not be synchronized

[Channel %1: ] Block %2 negative feed profile is ignored

[Channel %1: ] Block %2: movement not possible while transformation active.

[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)

[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)

[Channel %1: ] Block %2 interpolation type not allowed in stock removal contour

[Channel %1: ] Block %2 incorrect stock removal contour

[Channel %1: ] Block %2 preparation of contour has been restarted

[Channel %1: ] Block %2 contour programm does not contain enough contour blocks

[Channel %1: ] Block %2 array for contour segmentation is set too small

[Channel %1: ] Block %2 curve table %3: delete/overwrite not possible

[Channel %1: ] Block %2: Curve table %3: NC SRAM memory full, type %4

[Channel %1: ] Block %2 curve table %3: ille gal instruction during definition

[Channel %1: ] Block %2 curve table %3: direction reversal of lead value in the block not allowed

[Channel %1: ] Block %2 cur ve table %3: illegal transformation

[Channel %1: ] Bloc k %2 curve table %3: illegal coupling of axes

[Channel %1: ] Block %2 curve table %3: no contour defined

[Channel %1: ] Block %2 curve table %3: contour not continuous

[Channel %1: ] Block %2 curve table %3: position jump at end of period

[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion

[Channel %1: ] Calculation of arc length function too inaccurate

[Channel %1: ] Block %2 curve table %3: following value period is zero

[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion

[Channel %1: ] Block %2 curve table %3: NC me mory limit DRAM reached type %4.

[Channel %1: ] Lin. curve table %2, memory type %3 includes %4 polynomial segments.

[Channel %1: ] Block %2 COMPCURV/COMPCAD and radius compensation can-notbe used simultaneously

[Channel %1: ] Block %2 maximum cubic polynomials are allowed on active radius compensation.

[Channel %1: ] Block %2 function %3 not possible with path correction

[Channel %1: ] Block %2 continuous-path mode active during punching

[Channel %1: ] Block %2 orie ntation smoothing not possible

[Channel %1: ] Block %2 orient ation smoothing not possible with ORISON

[Channel %1: ] Block %2 address %3 programmed repeatedly

[Channel %1: ] Block %2 address %3 address type programmed too often

[Channel %1: ] Block %2 illegal address modification

[Channel %1: ] Block %2 invalid parameter or data type in %3

[Channel %1: ] Block %2 expression %3 is not of data type 'AXIS'

[Channel %1: ] Block %2 DIN address %3 not configured

[Channel %1: ] Block %2 same G group programmed repeatedly

[Channel %1: ] Block %2 too many syntax-defining G functions

[Channel %1: ] Block %2 syntax error in text %3

[Channel %1: ] Block %2 unexpected parameter %3

[Channel %1: ] Block %2 number of passes %3 not permissible