Volver a todos los modelos de Siemens Search all database
Siemens SINUMERIK 840D CNC
Códigos de error de Siemens SINUMERIK 840D CNC
Referencia completa de códigos de alarma y error para Siemens SINUMERIK 840D CNC. Explore a continuación los 4014 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Lista completa de alarmas (Page 3 of 21)
Código 12110
[Channel %1: ] Block %2 block syntax cannot be interpreted
Ver solución Código 12120
[Channel %1: ] Block %2 G function not separately programmed
Ver solución Código 12130
[Channel %1: ] Block %2 illegal tool orientation
Ver solución Código 12140
[Channel %1: ] Block %2 functionality %3 not implemented
Ver solución Código 12150
[Channel %1: ] Block %2 operation %3 not compatible with data type
Ver solución Código 12160
[Channel %1: ] Block %2 Value %3 lies beyond the value range
Ver solución Código 12161
[Channel %1: ] Block %2 Error on defining the limit %3
Ver solución Código 12162
[Channel %1: ] Block %2 Physical unit not allowed
Ver solución Código 12163
[Channel %1: ] Block %2 Change of access protection not allowed
Ver solución Código 12170
[Channel %1: ] Block %2 name %3 defined several times
Ver solución Código 12180
[Channel %1: ] Block %2 illegal chaining of operators %3
Ver solución Código 12185
[Channel %1: ] Block %2 a bit combination with %3 is not permitted
Ver solución Código 12190
[Channel %1: ] Block %2 variab le of type ARRAY has too many dimensions
Ver solución Código 12200
[Channel %1: ] Block %2 symbol %3 cannot be created
Ver solución Código 12205
[Channel %1: ] Block %2 area specification missing for GUD area
Ver solución Código 12210
[Channel %1: ] Block %2 string %3 too long
Ver solución Código 12220
[Channel %1: ] Block %2 binary constant %3 in string too long
Ver solución Código 12230
[Channel %1: ] Block %2 hexadecimal constant %3 in string too long
Ver solución Código 12240
[Channel %1: ] Block %2 tool orientation %3 defined repeatedly
Ver solución Código 12250
[Channel %1: ] Block %2 nested macro %3 not possible
Ver solución Código 12260
[Channel %1: ] Block %2 too many initialization values specified %3
Ver solución Código 12261
[Channel %1: ] Block %2 initialization of %3 not allowed
Ver solución Código 12270
[Channel %1: ] Block %2 macro identifier %3 already defined
Ver solución Código 12280
[Channel %1: ] Block %2 maximum macro length %3 exceeded
Ver solución Código 12290
[Channel %1: ] Block %2 arithmetic variable %3 not defined
Ver solución Código 12300
[Channel %1: ] Block %2 call-by-reference parameter missing on subroutine call %3
Ver solución Código 12310
[Channel %1: ] Block %2 axis parameter missing on procedure call %3
Ver solución Código 12320
[Channel %1: ] Block %2 parameter %3 is no variable
Ver solución Código 12330
[Channel %1: ] Block %2 ty pe of parameter %3 incorrect
Ver solución Código 12340
[Channel %1: ] Block %2 number of parameters too high %3
Ver solución Código 12350
[Channel %1: ] Block %2 parameter %3 no longer possible
Ver solución Código 12360
[Channel %1: ] Block %2 dimension of parameter %3 incorrect
Ver solución Código 12370
[Channel %1: ] Block %2 range of values %3 not permissible
Ver solución Código 12380
[Channel %1: ] Block %2 maximum memory capacity reached
Ver solución Código 12390
[Channel %1: ] Block %2 initialization value %3 cannot be converted
Ver solución Código 12400
[Channel %1: ] Block %2 fi eld %3 element does not exist
Ver solución Código 12410
[Channel %1: ] Block %2 incorrect index type for %3
Ver solución Código 12420
[Channel %1: ] Block %2 identifier %3 too long
Ver solución Código 12430
[Channel %1: ] Block %2 specified index is invalid
Ver solución Código 12440
[Channel %1: ] Block %2 maxi mum number of formal arguments exceeded
Ver solución Código 12450
[Channel %1: ] Block %2 label defined twice
Ver solución Código 12460
[Channel %1: ] Block %2 maximum number of symbols exceeded with %3
Ver solución Código 12470
[Channel %1: ] Block %2 G function %3 is unknown
Ver solución Código 12475
[Channel %1: ] Block %2 invalid G function number %3 programmed
Ver solución Código 12480
[Channel %1: ] Block %2 subroutine %3 already defined
Ver solución Código 12481
[Channel %1: ] Block %2 program attribute %3 not allowed
Ver solución Código 12490
[Channel %1: ] Block %2 access permission level %3 is not valid
Ver solución Código 12495
Channel %1 Block %2 Change (definition) of data class %3 is not allowed here
Ver solución Código 12500
[Channel %1: ] Block %2 in this module %3 is not possible
Ver solución Código 12510
[Channel %1: ] Block %2 too many machine data %3
Ver solución Código 12520
[Channel %1: ] Block %2 too many tool parameters %3
Ver solución Código 12530
[Channel %1: ] Block %2 invalid index for %3
Ver solución Código 12540
[Channel %1: ] Block %2 Block is too long or too complex
Ver solución Código 12550
[Channel %1: ] Block %2 name %3 not defined or option/function not activated
Ver solución Código 12552
[Channel %1: ] Block %2 tool/magazine OEM parameter not defined. Option not set. Option not set.
Ver solución Código 12553
[Channel %1: ] Block %2 name %3 option/function is not active
Ver solución Código 12554
[Channel %1: ] Block %2 replacement cycle %3 for the predefined procedure is missing.
Ver solución Código 12555
[Channel %1: ] Block %2 function not available (identification %3)
Ver solución Código 12556
[Channel %1: ] Block %2 name %3 Name is already known
Ver solución Código 12560
[Channel %1: ] Block %2 programmed value %3 exceeds allowed limits
Ver solución Código 12570
[Channel %1: ] Block %2 too many motion synchronous actions in %3
Ver solución Código 12571
[Channel %1: ] Block %2 %3 not permissible for motion synchronous action
Ver solución Código 12572
[Channel %1: ] Block %2 %3 only permissible for motion synchronous action
Ver solución Código 12573
[Channel %1: ] Block %2 motion-synchronous action: Call by reference parameters not allowed %3
Ver solución Código 12580
[Channel %1: ] Block %2 %3 not permissible for assignment in motion synchronous action
Ver solución Código 12581
[Channel %1: ] Block %2 invalid read access to %3 while in motion synchronous action
Ver solución Código 12582
[Channel %1: ] Block %2 field index %3 incorrect
Ver solución Código 12583
[Channel %1: ] Block %2 variable %3 no system variable
Ver solución Código 12584
[Channel %1: ] Block %2 variable %3 cannot be read synchronously with motion
Ver solución Código 12585
[Channel %1: ] Block %2 variable %3 cannot be changed synchronously with motion
Ver solución Código 12586
[Channel %1: ] Block %2 motion synchronous action: type conflict in variable %3
Ver solución Código 12587
[Channel %1: ] Block %2 motion synchronous action: operation/function %3 not allowed
Ver solución Código 12588
[Channel %1: ] Block %2 motion synchronous action: address %3 not allowed
Ver solución Código 12589
[Channel %1: ] Block %2 motion synchronous action: variable %3 not allowed with modal ID
Ver solución Código 12590
[Channel %1: ] Block %2 global user data cannot be created
Ver solución Código 12600
[Channel %1: ] Block %2 invalid line checksum
Ver solución Código 12610
[Channel %1: ] Block %2 accessi ng single character with call-by- reference parameter not possible %3
Ver solución Código 12620
[Channel %1: ] Block %2 accessing th is variable as single character not possible %3
Ver solución Código 12630
[Channel %1: ] Block %2 skip ID/label in control structure not allowed
Ver solución Código 12640
[Channel %1: ] Block %2 invalid nesting of control structures
Ver solución Código 12641
[Channel %1: ] Block %2 maximum nesting depth of control structures exceeded
Ver solución Código 12650
Channel %1 block %2 axis identifier %3 different in channel %4
Ver solución Código 12660
[Channel %1: ] Block %2 motion synchronous action: variable %3 reserved formotion synchronous actions and technology cycles
Ver solución Código 12661
[Channel %1: ] Block %2 technology cycle %3: no further subprogram call possible
Ver solución Código 12700
[Channel %1: ] Block %2 contour definition programming not allowed as modal sub-programis active
Ver solución Código 12701
[Channel %1: ] Block %2 illegal interpolation type for contour definition active
Ver solución Código 12710
[Channel %1: ] Block %2 illegal language element in external language mode
Ver solución Código 12720
[Channel %1: ] Block %2 program number for macro call (G65/G66) missing
Ver solución Código 12722
[Channel %1: ] Block %2 multiple ISO_2/3 macro or cycle calls in the block
Ver solución Código 12724
[Channel %1: ] Block %2 no radius programmed for cylinder interpolation acti vation/deactivation
Ver solución Código 12726
[Channel %1: ] Block %2 illegal plane selection with parallel axes
Ver solución Código 12728
[Channel %1: ] Block %2 distance for double turret not set
Ver solución Código 12730
[Channel %1: ] Block %2 no valid transformation machine data parameterized
Ver solución Código 12740
[Channel %1: ] Block %2 modal macro call %3 not possible
Ver solución Código 14000
[Channel %1: ] Block %2 illegal end of file
Ver solución Código 14001
[Channel %1: ] Block %2 illegal end of block
Ver solución Código 14005
[Channel %1: ] Block %2 program %3 program-specific start disable has been set
Ver solución Código 14006
[Channel %1: ] Block %2 invalid program name %3
Ver solución Código 14008
[Channel %1: ] Block %2 WRITE command writes in the temporary memory area in /_N_EXT_DIR
Ver solución Código 14009
[Channel %1: ] Block %2 illegal program path %3
Ver solución Código 14010
[Channel %1: ] Block %2 invalid default parameter in subroutine call
Ver solución Código 14011
[Channel %1: ] Block %2 program %3 not existing or will be edited
Ver solución Código 14012
[Channel %1: ] Block %2 maximum subroutine level exceeded
Ver solución Código 14013
[Channel %1: ] Block %2 number of subroutine passes invalid
Ver solución Código 14014
[Channel %1: ] Selected program %3 not available or will be edited
Ver solución Código 14015
[Channel %1: ] Block %2 program %3 is not enabled
Ver solución Código 14016
[Channel %1: ] Block %2 error when calling the subroutine via M/T function
Ver solución Código 14017
[Channel %1: ] Block %2 syntax error when calling the subroutine via M function
Ver solución Código 14018
[Channel %1: ] Block %2 parts program command %3 not executable (protection level setpoint value / actual value: %4)
Ver solución Código 14020
[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call
Ver solución Código 14021
[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call
Ver solución Código 14022
[Channel %1: ] Block %2 error on function or procedure call, error code %3
Ver solución Código 14025
[Channel %1: ] Block %2 motion synchronous action: illegal modal ID
Ver solución Código 14026
[Channel %1: ] Block %2 motion synchronous action: invalid polynomial number in the FCTDEF command
Ver solución Código 14027
[Channel %1: ] Block %2 motion-synchronous action: Too many technology cycles programmed.
Ver solución Código 14028
[Channel %1: ] Block %2 motion-s ynchronous action: Technology cycle programmed with t oo many parameters
Ver solución Código 14030
[Channel %1: ] Block %2 combine OSCILL and POSP during oscillation with infeedmotion
Ver solución Código 14033
[Channel %1: ] Block %2 involute: no end point programmed
Ver solución Código 14034
[Channel %1: ] Block %2 involute: angle of rotation too large
Ver solución Código 14035
[Channel %1: ] Block %2 involute: start point invalid
Ver solución Código 14036
[Channel %1: ] Block %2 involute: end point invalid
Ver solución Código 14037
[Channel %1: ] Block %2 involute: radius invalid
Ver solución Código 14038
[Channel %1: ] Block %2 involute not definable: end point error
Ver solución Código 14039
[Channel %1: ] Block %2 involute: end point programmed several times
Ver solución Código 14040
[Channel %1: ] Block %2 error in end point of circle
Ver solución Código 14045
[Channel %1: ] Block %2 error in tangential circle programming
Ver solución Código 14048
[Channel %1: ] Block %2 wrong number of revolutions in circle programming
Ver solución Código 14050
[Channel %1: ] Block %2 nesting depth for arithmetic operations exceeded
Ver solución Código 14051
[Channel %1: ] Block %2 arithmetic error in part program
Ver solución Código 14055
[Channel %1: ] Block %2 impermissible NC language substitution, error code %3
Ver solución Código 14060
[Channel %1: ] Block %2 invalid skip level with differential block skip
Ver solución Código 14070
[Channel %1: ] Block %2 memory for variable s not sufficient for subroutine call
Ver solución Código 14080
[Channel %1: ] Block %2 jump destination %3 not found
Ver solución Código 14082
[Channel %1: ] Block %2 label %3 program section not found
Ver solución Código 14085
[Channel %1: ] Block %2 instruction not allowed
Ver solución Código 14088
[Channel %1: ] Block %2 axis %3 doubtful position
Ver solución Código 14090
[Channel %1: ] Block %2 invalid D number
Ver solución Código 14091
[Channel %1: ] Block %2 illegal function, index %3
Ver solución Código 14092
[Channel %1: ] Block %2 axis %3 is wrong axis type
Ver solución Código 14093
[Channel %1: ] Block %2 path interval <= 0 with polynominal interpolation
Ver solución Código 14094
[Channel %1: ] Block %2 polynominal degree greater than 3 programmed for polynominal interpolation
Ver solución Código 14095
[Channel %1: ] Block %2 radius for circle programming too small
Ver solución Código 14096
[Channel %1: ] Block %2 illegal type conversion
Ver solución Código 14097
[Channel %1: ] Block %2 string cannot be converted to AXIS type
Ver solución Código 14098
[Channel %1: ] Block %2 conversion error: no valid number found
Ver solución Código 14099
[Channel %1: ] Block %2 result in string concatenation too long
Ver solución Código 14100
[Channel %1: ] Block %2 orientation transformation not available
Ver solución Código 14101
[Channel %1: ] Block %2 orientation transformation not active
Ver solución Código 14102
[Channel %1: ] Block %2 polynominal degree greater than 5 programmed for orientation vector angle
Ver solución Código 14104
[Channel %1: ] Block %2 Active transformation allows neither vector programming nor interpolation
Ver solución Código 14110
[Channel %1: ] Block %2 Euler angles and orientation vector components programmed
Ver solución Código 14111
[Channel %1: ] Block %2 Euler angles, orientation vector and transformation axes programmed
Ver solución Código 14112
[Channel %1: ] Block %2 programmed orientation path not possible
Ver solución Código 14113
[Channel %1: ] Block %2 programmed lead angle too large
Ver solución Código 14114
[Channel %1: ] Block %2 programmed tilt angle too large
Ver solución Código 14115
[Channel %1: ] Block %2 illegal definition of workpiece surface
Ver solución Código 14116
[Channel %1: ] Block %2 absolute orientation programmed while ORIPATH/ORIPATHS is active
Ver solución Código 14117
[Channel %1: ] Block %2 no angle or direction of the cone programmmed
Ver solución Código 14118
[Channel %1: ] Block %2 no end orientation programmed
Ver solución Código 14119
[Channel %1: ] Block %2 no intermediate orientation programmed
Ver solución Código 14120
[Channel %1: ] Block %2 plane determination for programmed orientation not possible
Ver solución Código 14121
[Channel %1: ] Block %2 no orientation defined (distance equals zero).
Ver solución Código 14122
[Channel %1: ] Block %2 angle and direction of the cone programmed
Ver solución Código 14123
[Channel %1: ] Block %2 nutation angle of the cone too small
Ver solución Código 14124
[Channel %1: ] Block %2 start tangent for orientation is zero
Ver solución Código 14125
[Channel %1: ] Block %2 programmed rotation is not possible
Ver solución Código 14126
[Channel %1: ] Block %2 ORIPATH lift factor impermissible.
Ver solución Código 14127
[Channel %1: ] Block %2 rotation programmed several times
Ver solución Código 14128
[Channel %1: ] Block %2 absolute programming of the orienting rotation with active ORIROTC.
Ver solución Código 14129
[Channel %1: ] Block %2 orientation angles and orientation vector components programmed
Ver solución Código 14130
[Channel %1: ] Block %2 too many initialization values given
Ver solución Código 14131
[Channel %1: ] Block %2 orientation axes and lead/tilt angles programmed
Ver solución Código 14132
[Channel %1: ] Block %2 orientation axes incorrectly configured
Ver solución Código 14133
[Channel %1: ] Block %2 G code for orientation definition not allowed
Ver solución Código 14134
[Channel %1: ] Block %2 G code for orientation interpolation not allowed
Ver solución Código 14136
[Channel %1: ] Block %2 Orientation polynomial is not permitted
Ver solución Código 14137
[Channel %1: ] Block %2 Polynomials PO[PHI] and PO[PSI] are not permitted
Ver solución Código 14138
[Channel %1: ] Block %2 Polynomials PO[XH], PO[YH] and PO[ZH] are not permitted
Ver solución Código 14139
[Channel %1: ] Block %2 Polynomial for angle of rotation PO[THT] is not permitted
Ver solución Código 14140
[Channel %1: ] Block %2 position programming without transformation not allowed
Ver solución Código 14144
[Channel %1: ] Block %2 PTP movement not allowed
Ver solución Código 14146
[Channel %1: ] Block %2 CP or PTP movement without transformation not allowed
Ver solución Código 14147
[Channel %1: ] Block %2 spline for orientation not possible.
Ver solución Código 14148
[Channel %1: ] Illegal reference system for Cartesian manual traverse
Ver solución Código 14150
[Channel %1: ] Block %2 illegal tool carrier number programmed or declared (MD)
Ver solución Código 14151
[Channel %1: ] Block %2 illegal tool carrier rotation
Ver solución Código 14152
[Channel %1: ] Block %2 tool carrier: invalid orientation. Error code: %3
Ver solución Código 14153
[Channel %1: ] Block %2 unknown tool carrier type: %3
Ver solución Código 14154
[Channel %1: ] Block %2 The amount of fine correction in parameter %3of the orientable toolholder %4 is too large
Ver solución Código 14155
[Channel %1: ] Block %2 invalid base frame definition for tool carrier offset
Ver solución Código 14156
[Channel %1: ] Toolholder selection error at reset
Ver solución Código 14157
[Channel %1: ] Block %2 illegal interpolation type with MOVT
Ver solución Código 14159
[Channel %1: ] Block %2 more than two angles programmed with ROTS or AROTS
Ver solución Código 14160
[Channel %1: ] Block %2 tool length selection without geometry axis specification
Ver solución Código 14162
[Channel %1: ] Block %2 error %3 on activation of the CUTMOD function
Ver solución Código 14165
[Channel %1: ] Block %2 selected ISO H/D number %3 does not match tool %4
Ver solución Código 14166
[Channel %1: ] Block %2 error %3 when programming a tool length offset with TOFF / TOFFL
Ver solución Código 14170
[Channel %1: ] Block %2 illegal interpolation type with tool length compensation
Ver solución Código 14180
[Channel %1: ] Block %2 H number %3 is not defined
Ver solución Código 14181
[Channel %1: ] Block %2 ISO tool offset %3 not present
Ver solución