Zurück zu allen Chiron Modellen Search all database
Chiron Siemens-Control CNC
Chiron Siemens-Control CNC Fehlercodes
Vollständige Alarm- und Fehlercode-Referenz für die Chiron Siemens-Control CNC. Durchsuchen Sie unten alle 545 dokumentierten Fehlercodes, die jeweils zu einer detaillierten Anleitung zur Fehlerbehebung führen.
Search this section
Search Chiron Siemens-Control CNC
Search all 545 Chiron Siemens-Control CNC codes without changing pages.
Vollständige Alarmliste (Page 3 of 3)
Code 700220
Tool broken (attribut a=5)
Lösung ansehen Code 700152
Tool broken
Lösung ansehen Code 700246
Tool for the first time in use
Lösung ansehen Code 700358
Tool attributes are read (Please wait)
Lösung ansehen Code 700357
No tool data for spindle (output M600 in MDA)
Lösung ansehen Code 700939
Tool data spindle missing (manual tool change: move tool changer up/down)
Lösung ansehen Code 700232
Tool data getting checked
Lösung ansehen Code 700235
Tool life expired for cutting edge 1
Lösung ansehen Code 700236
Tool life expired for cutting edge 2
Lösung ansehen Code 700129
Warning! Tool in spindle
Lösung ansehen Code 701059
Loading position incorrectly occupied. Place is reserved for spindle tool.
Lösung ansehen Code 700628
Brake, magazine cover, not actuated (WAL axis)
Lösung ansehen Code 700629
Brake, magazine cover, not actuated (WAR axis)
Lösung ansehen Code 702513
Wire breakage, analog sensor! Amplification motor, main spindle, engaged
Lösung ansehen Code 702514
Wire breakage, analog sensor! Amplification motor, main spindle, disengaged
Lösung ansehen Code 702506
Wire breakage, analog sensor! Tool unclamped spindle 1
Lösung ansehen Code 702507
Wire breakage, analog sensor! Tool unclamped spindle 2
Lösung ansehen Code 702504
Wire breakage, analog sensor! Tool clamped spindle 1
Lösung ansehen Code 702505
Wire breakage, analog sensor! Tool clamped spindle 2
Lösung ansehen Code 703119
Main spindle speed greater than 800 rpm not possible! Amplifi- cation motor, main spindle is engaged
Lösung ansehen Code 700659
Check the setting of the tool changer cover
Lösung ansehen Code 700622
Prox. switch magazine cover open / closed
Lösung ansehen Code 701701
Check limit switch tool pocket vacant 1
Lösung ansehen Code 701702
Check limit switch tool pocket vacant 2
Lösung ansehen Code 701703
Check limit switch tool pocket vacant 3
Lösung ansehen Code 701704
Check limit switch tool pocket vacant 4
Lösung ansehen Code 700307
Check sensor: >magazine place free (changing position)<
Lösung ansehen Code 700749
Check limit switch: >Magazine place free (loading position)<
Lösung ansehen Code 700121
Prox. switch toolchanger up/down
Lösung ansehen Code 700300
Prox. switch tool changer cover open/closed (1)
Lösung ansehen Code 700309
Prox. switch tool changer cover open/closed (2)
Lösung ansehen Code 702208
GUD variable >ABSTAND_SP1_BELADESTELLE< not defined or value incorrect
Lösung ansehen Code 700331
No tool clamping system selected
Lösung ansehen Code 701631
No enable tool change! Blocked area X-axis
Lösung ansehen Code 510127
No enable for tool change
Lösung ansehen Code 700035
Chain index not moved out (1)
Lösung ansehen Code 700535
Chain index not disengaged (2)
Lösung ansehen Code 700034
Chain index not indexed (1)
Lösung ansehen Code 700663
Magazine cover not closed
Lösung ansehen Code 700662
Magazine cover not open
Lösung ansehen Code 700335
Magazine chain not unlocked
Lösung ansehen Code 700044
Magazine chain not in position. No enable, magazine slide!
Lösung ansehen Code 700334
Magazine chain not locked
Lösung ansehen Code 700037
Tool pocket occupied (1)
Lösung ansehen Code 701750
Tool pocket occupied 1
Lösung ansehen Code 700537
Tool pocket occupied (2)
Lösung ansehen Code 701751
Tool pocket occupied 2
Lösung ansehen Code 701752
Tool pocket occupied 3
Lösung ansehen Code 701753
Tool pocket occupied 4
Lösung ansehen Code 701232
Magazine test in progress. Please wait. Tool correctly stored in magazine?
Lösung ansehen Code 700333
Magazine slide not unlocked
Lösung ansehen Code 700339
Magazine slide not in home position
Lösung ansehen Code 700040
Magazine slide not in position. No enable, magazine chain!
Lösung ansehen Code 700355
Magazine slide not in spindle position
Lösung ansehen Code 700332
Magazine slide not locked
Lösung ansehen Code 700439
Tool not released (2)
Lösung ansehen Code 701618
Check sensor: >No tool present (tool gripper)<
Lösung ansehen Code 700306
Check sensor: >Tool inserted correctly (loading position)<
Lösung ansehen Code 700308
Check sensor! Magazine place free (1)
Lösung ansehen Code 701626
Check sensor: >Magazine place free (magazine chain)<
Lösung ansehen Code 700506
Sensor monitoring! Chain index indexed/disengaged (1)
Lösung ansehen Code 700318
Sensor monitoring! Magazine chain locked /unlocked
Lösung ansehen Code 700305
Sensor monitoring! Magazine slide, home position/spindle posi- tion
Lösung ansehen Code 700317
Sensor monitoring! Magazine slide locked/unlocked
Lösung ansehen Code 700060
Spindle tool not defined
Lösung ansehen Code 700262
Tool not correctly clamped (1)
Lösung ansehen Code 700462
Tool not correctly clamped (2)
Lösung ansehen Code 700752
Tool clamped >P< missing: (Hydraulic pressure sensor)
Lösung ansehen Code 700162
Releasing tool in automatic mode with key is activated
Lösung ansehen Code 700240
Tool not engaged in spindle (1)
Lösung ansehen Code 700239
Tool not released (1)
Lösung ansehen Code 702538
Tool not released (3)
Lösung ansehen Code 702539
Tool not released (4)
Lösung ansehen Code 700238
Tool not locked (1)
Lösung ansehen Code 700438
Tool not clamped (2)
Lösung ansehen Code 701152
Tool not inserted correctly (loading place)
Lösung ansehen Code 700352
Tool holder not correctly seated in tool magazine (1)
Lösung ansehen Code 700241
Tool engaged in wrong position spindle (1)
Lösung ansehen Code 510124
No tool # selected
Lösung ansehen Code 701062
Tool not present or not correctly stored in magazine
Lösung ansehen Code 700252
Tool still in the spindle
Lösung ansehen Code 702500
Learn tool clamping query spindle 1
Lösung ansehen Code 702501
Learn tool clamping query spindle 2
Lösung ansehen Code 702502
Learn tool clamping query spindle 3
Lösung ansehen Code 702503
Learn tool clamping query spindle 4
Lösung ansehen Code 701158
Tool in spindle was unclamped manually. Check, if the right tool is in the spindle. Continue with Feed Start.
Lösung ansehen Code 701063
Tool was not stored in magazine correctly
Lösung ansehen Code 700244
Tool arm not up (1)
Lösung ansehen Code 700245
Tool arm not down (1)
Lösung ansehen Code 700434
Tool holder soiled (1) --> cleaning necessary.
Lösung ansehen Code 700435
Tool holder soiled (2) --> cleaning necessary.
Lösung ansehen Code 700039
Tool magazine not in position (1)
Lösung ansehen Code 510115
Tool place in the chain is not available (in adjacent place is an oversized tool!)
Lösung ansehen Code 510126
Tool change not finished
Lösung ansehen Code 701038
Tool change was interrupted. (Press the home position key)
Lösung ansehen Code 510014
Manual tool change active
Lösung ansehen Code 700356
Tool changer not in home position
Lösung ansehen Code 700242
Tool changer not up
Lösung ansehen Code 701036
The tool magazine shutter doesn't close
Lösung ansehen Code 701037
The tool magazine shutter doesn't open
Lösung ansehen Code 700630
Monitoring, brake, magazine cover (WAL axis)! Relay defective! (don’t switch off machine)
Lösung ansehen Code 700631
Monitoring, brake, magazine cover (WAR axis)! Relay defective! (don’t switch off machine)
Lösung ansehen Code 701851
Speed monitoring, tool revolver (TR)
Lösung ansehen Code 701854
Wrong tool in the tool revolver
Lösung ansehen Code 701253
Index, centric tensioner, not extended
Lösung ansehen Code 701254
Index, centric tensioner, not retracted
Lösung ansehen Code 701804
PLC MD incorrect (tool revolver coolant)
Lösung ansehen Code 702231
Sensor monitoring! Tool revolver drive engaged/disengaged
Lösung ansehen Code 701856
Tool revolver tool data missing (output M600 in MDA on channel 3)
Lösung ansehen Code 702258
Tool revolver - Reference point not approached
Lösung ansehen Code 702256
Tool revolver - Tool still engaged
Lösung ansehen Code 702254
Tool revolver tool magazine not in position
Lösung ansehen Code 702253
Tool revolver tool change not executed
Lösung ansehen Code 702250
Tool revolver drive not disengaged
Lösung ansehen Code 702251
Tool revolver drive not engaged
Lösung ansehen Code 702229
Tool revolver slip clutch not engaged
Lösung ansehen Code 701862
Tool revolver unlocked
Lösung ansehen Code 702255
Tool revolver not in home position
Lösung ansehen Code 702230
Check tool revolver reference point (sensor=1 == place 1)
Lösung ansehen Code 702252
Tool revolver tool not engaged
Lösung ansehen Code 701214
Tool revolver: No enable tool change
Lösung ansehen Code 701212
Tool revolver: XR axis not in position
Lösung ansehen Code 701213
Tool revolver: ZR axis not in position
Lösung ansehen Code 701861
Centric tensioner in tool revolver > Activate axis mode
Lösung ansehen Code 701252
Centric tensioner not released
Lösung ansehen Code 701251
Centric tensioner not clamped
Lösung ansehen Code 701215
Centric clamp not in position
Lösung ansehen Code 701211
Centric tensioner not activated in the tool revolver
Lösung ansehen Code 701801
ZR axis was moved up! (check reference point)
Lösung ansehen Code 701423
PLC-MD wrong (central lubrication system
Lösung ansehen Code 701463
Central lubrication system active
Lösung ansehen Code 701420
Central lubrication system: operation time monitoring
Lösung ansehen Code 701421
Central lubrication system: container empty
Lösung ansehen Code 701422
Central lubrication system: interval not allowed ! PLC-MD wrong
Lösung ansehen Code 701508
PLC-MD incorrect: oil/air lubrication main spindle
Lösung ansehen Code 701512
Check sensor: >Oil/air lubrication > Operating pressure (air) present (spindle 2)<
Lösung ansehen Code 701511
Check sensor: >Oil/air lubrication > Operating pressure (air) present <
Lösung ansehen Code 701510
Oil/air lubrication malfunction! Negative pressure, vacuum suction nozzle, not present (spindle 2)
Lösung ansehen Code 701507
Malfunction, oil/air lubrication! Negative pressure vacuum suction nozzle not present
Lösung ansehen Code 701538
Pre-warning, oil/air lubrication! Negative pressure, vacuum suction nozzle, not present (spindle 1/2)
Lösung ansehen Code 701551
Oil/air lubrication > Operating pressure (air) not present (spindle 2)
Lösung ansehen Code 701506
Oil/air lubrication > oil operating pressure not present
Lösung ansehen Code 701540
Oil/air lubrication > oil level minimum
Lösung ansehen Code 701539
Oil/air lubrication main spindle -> prelubrication is running
Lösung ansehen Code 701550
Oil/air lubrication > air operating pressure not present
Lösung ansehen ← Previous
401-545 of 545