Chiron Siemens-Control CNC 錯誤代碼

Tool broken (attribut a=5)

Tool broken

Tool for the first time in use

Tool attributes are read (Please wait)

No tool data for spindle (output M600 in MDA)

Tool data spindle missing (manual tool change: move tool changer up/down)

Tool data getting checked

Tool life expired for cutting edge 1

Tool life expired for cutting edge 2

Warning! Tool in spindle

Loading position incorrectly occupied. Place is reserved for spindle tool.

Brake, magazine cover, not actuated (WAL axis)

Brake, magazine cover, not actuated (WAR axis)

Wire breakage, analog sensor! Amplification motor, main spindle, engaged

Wire breakage, analog sensor! Amplification motor, main spindle, disengaged

Wire breakage, analog sensor! Tool unclamped spindle 1

Wire breakage, analog sensor! Tool unclamped spindle 2

Wire breakage, analog sensor! Tool clamped spindle 1

Wire breakage, analog sensor! Tool clamped spindle 2

Main spindle speed greater than 800 rpm not possible! Amplifi- cation motor, main spindle is engaged

Check the setting of the tool changer cover

Prox. switch magazine cover open / closed

Check limit switch tool pocket vacant 1

Check limit switch tool pocket vacant 2

Check limit switch tool pocket vacant 3

Check limit switch tool pocket vacant 4

Check sensor: >magazine place free (changing position)<

Check limit switch: >Magazine place free (loading position)<

Prox. switch toolchanger up/down

Prox. switch tool changer cover open/closed (1)

Prox. switch tool changer cover open/closed (2)

GUD variable >ABSTAND_SP1_BELADESTELLE< not defined or value incorrect

No tool clamping system selected

No enable tool change! Blocked area X-axis

No enable for tool change

Chain index not moved out (1)

Chain index not disengaged (2)

Chain index not indexed (1)

Magazine cover not closed

Magazine cover not open

Magazine chain not unlocked

Magazine chain not in position. No enable, magazine slide!

Magazine chain not locked

Tool pocket occupied (1)

Tool pocket occupied 1

Tool pocket occupied (2)

Tool pocket occupied 2

Tool pocket occupied 3

Tool pocket occupied 4

Magazine test in progress. Please wait. Tool correctly stored in magazine?

Magazine slide not unlocked

Magazine slide not in home position

Magazine slide not in position. No enable, magazine chain!

Magazine slide not in spindle position

Magazine slide not locked

Tool not released (2)

Check sensor: >No tool present (tool gripper)<

Check sensor: >Tool inserted correctly (loading position)<

Check sensor! Magazine place free (1)

Check sensor: >Magazine place free (magazine chain)<

Sensor monitoring! Chain index indexed/disengaged (1)

Sensor monitoring! Magazine chain locked /unlocked

Sensor monitoring! Magazine slide, home position/spindle posi- tion

Sensor monitoring! Magazine slide locked/unlocked

Spindle tool not defined

Tool not correctly clamped (1)

Tool not correctly clamped (2)

Tool clamped >P< missing: (Hydraulic pressure sensor)

Releasing tool in automatic mode with key is activated

Tool not engaged in spindle (1)

Tool not released (1)

Tool not released (3)

Tool not released (4)

Tool not locked (1)

Tool not clamped (2)

Tool not inserted correctly (loading place)

Tool holder not correctly seated in tool magazine (1)

Tool engaged in wrong position spindle (1)

No tool # selected

Tool not present or not correctly stored in magazine

Tool still in the spindle

Learn tool clamping query spindle 1

Learn tool clamping query spindle 2

Learn tool clamping query spindle 3

Learn tool clamping query spindle 4

Tool in spindle was unclamped manually. Check, if the right tool is in the spindle. Continue with Feed Start.

Tool was not stored in magazine correctly

Tool arm not up (1)

Tool arm not down (1)

Tool holder soiled (1) --> cleaning necessary.

Tool holder soiled (2) --> cleaning necessary.

Tool magazine not in position (1)

Tool place in the chain is not available (in adjacent place is an oversized tool!)

Tool change not finished

Tool change was interrupted. (Press the home position key)

Manual tool change active

Tool changer not in home position

Tool changer not up

The tool magazine shutter doesn't close

The tool magazine shutter doesn't open

Monitoring, brake, magazine cover (WAL axis)! Relay defective! (don’t switch off machine)

Monitoring, brake, magazine cover (WAR axis)! Relay defective! (don’t switch off machine)

Speed monitoring, tool revolver (TR)

Wrong tool in the tool revolver

Index, centric tensioner, not extended

Index, centric tensioner, not retracted

PLC MD incorrect (tool revolver coolant)

Sensor monitoring! Tool revolver drive engaged/disengaged

Tool revolver tool data missing (output M600 in MDA on channel 3)

Tool revolver - Reference point not approached

Tool revolver - Tool still engaged

Tool revolver tool magazine not in position

Tool revolver tool change not executed

Tool revolver drive not disengaged

Tool revolver drive not engaged

Tool revolver slip clutch not engaged

Tool revolver unlocked

Tool revolver not in home position

Check tool revolver reference point (sensor=1 == place 1)

Tool revolver tool not engaged

Tool revolver: No enable tool change

Tool revolver: XR axis not in position

Tool revolver: ZR axis not in position

Centric tensioner in tool revolver > Activate axis mode

Centric tensioner not released

Centric tensioner not clamped

Centric clamp not in position

Centric tensioner not activated in the tool revolver

ZR axis was moved up! (check reference point)

PLC-MD wrong (central lubrication system

Central lubrication system active

Central lubrication system: operation time monitoring

Central lubrication system: container empty

Central lubrication system: interval not allowed ! PLC-MD wrong

PLC-MD incorrect: oil/air lubrication main spindle

Check sensor: >Oil/air lubrication > Operating pressure (air) present (spindle 2)<

Check sensor: >Oil/air lubrication > Operating pressure (air) present <

Oil/air lubrication malfunction! Negative pressure, vacuum suction nozzle, not present (spindle 2)

Malfunction, oil/air lubrication! Negative pressure vacuum suction nozzle not present

Pre-warning, oil/air lubrication! Negative pressure, vacuum suction nozzle, not present (spindle 1/2)

Oil/air lubrication > Operating pressure (air) not present (spindle 2)

Oil/air lubrication > oil operating pressure not present

Oil/air lubrication > oil level minimum

Oil/air lubrication main spindle -> prelubrication is running

Oil/air lubrication > air operating pressure not present